DeWALT 9 Gallon Poly Wet/Dry Vac
- Sturdy 9 Gallon wet/dry vac ideal for large pick-up applications 9 Gallon poly container
- Powerful 5 peak horsepower motor provides just the amount of suction needed to most any cleanup job
- Ultra durable rubberized casters allow smooth swiveling for ease of movement
- 10′ power cord with cord wrap helps reach almost any cleanup need
- Built-in blower port powerful enough to blow sawdust and debri from most any workshop
- Built-in accessory storage bag conveniently attached to the backside of the vac to keep all accessories neatly organized
- Large built-in tank drain makes it easy to remove liquids picked up
The 9 Gallon wet/dry vac has a convenient handle and large rear wheels for large clean-up applications. It arrives with a dust cartridge filter for small, dry debris and wet materials. This vac also features a strong handle for easy carrying, large on/off switch with water-resistant design for safe and quick access, convenient, built-in 20’ power cord and accessory bag to get all your accessories/tools organized. Swiveling casters provide ease of movement in any direction while a built-in tank drain makes draining easy.
List Price: $ 99.00
WEN 4276 2.1-Amp 6-Inch Bench Grinder with Flexible Work Light
- 2.1-Amp motor
- 3450 RPM at no load
- 6 in. by 3/4 in. wheels, 1/2 in. arbor size
- Lightweight design weighs in at 16 lb.
- Worklight for maximum precision and visibility
Remember when you spent all that money replacing dull rusty tools? From deburring ragged edges to cleaning objects to sharpening blades, the WEN 6-inch Bench Grinder is the ideal companion for any workshop. These machines allow for simple resuscitation of dull blades, scissors, screwdrivers, and more. Compact yet powerful, the WEN 6-Inch Bench Grinder provides reliability even in the face of the most difficult tasks. Our package includes two 6-inch by 3/4-inch wheels: a 60-grit wheel for material removal and general purpose grinding and a coarse 36-grit wheel for faster material removal. With our quiet 2.1 amp motor, expect quick startups, smooth performance and steady speeds of 3450 RPM. This fast speed is ideal for deburring unwanted edges and rust removal. Built with you in mind, our design makes wheel guard removal simple for easy wheel changes. The included eye guards can adjust to prevent them from interfering with your project. Also, don’t forget about the flexible work light helping to illuminate your grinding for an increase in accuracy and precision. Of course, as with all WEN Products, our 6-Inch Bench Grinder is covered with a two-year warranty, a friendly and knowledgeable customer service hotline and a national service network. No need to waste anymore money on new tools. The WEN 6-Inch Bench Grinder will save you money by leaving all of your tools as sharp and clean as the day you bought them. Remember when your blades could actually cut through something other than butter? Remember WEN.
List Price: $ 40.34
Decent grinder for the price.,
I used it to sharpen some chisels and a kitchen knife set that was so dull that the sharpening tools were useless. Afterwards a few passes through the knife sharpener was all it took to get the knives back to a ‘like new’ condition. Since this is what it’s mostly going to be used for – I meets my needs perfectly.
Great When Used as a Buffer as Well as a Grinder,
With the above in mind, I found this bench grinder to be more than adequate. It is very quiet, does not vibrate and has sufficient power to perform the simple tasks I ask of it. It does not bind or slow down when moderate pressure is placed on a buffing wheel and the built-in light is very useful. The rubber feet hold it in place securely and I did not feel any need to attempt to secure it to a work top.
In order to provide good access to the buffing wheel, I removed the shroud on one side and mounted the buffing wheel “bare”. When mounted in this manner, I had more than adequate access to the buffing wheel, even with pieces over 2 feet long.
I looked at a number of units before ordering this one and I’m very pleased with my purchase.
Down on power, works well with very light passes.,
On to the task at hand – sharpening the mower blades. Well, it worked. Worked much better than the pneumatic die grinder and file I had been using. However it was a under powered when more than gentle pressure was applied, and would bog down very quickly once the mower blade would towards the end and not rest on the tool rest fully supported. The amount of power is the reason for the single star docking, I wish it had more. That being said – for what I paid for it, the stand and the ease of use, it’s still a solid little worker for the likely 4-5 times a year that I’ll be using this thing. Would I recommend it – sure for my use mentioned above, would I buy it again if this one fails, no. I’d buy something with more power.
The pictures are the boxes, the unit installed on the stand, the unit assembled on the stand.
Best vacuum ever,
Love this wet/vac,
P O W E R F U L ! ! ! (read below for a good LOL),