DEWALT DCD996B Bare Tool 20V MAX XR Lithium Ion Brushless 3-Speed Hammer Drill (Tool Only)

PowerTool DIY | 2019-02-26 |

DEWALT DCD996B Bare Tool 20V MAX XR Lithium Ion Brushless 3-Speed Hammer Drill (Tool Only)

High performance transmission for fast application speeds and improved run-time
High efficiency brushless motor delivers up to 57% more run time over brushed
0-38,250 BPM for fast drilling in masonry materials
3-Mode LED light with Spotlight mode
Battery sold separately
Battery & Charger Sold Separately
*Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18

At just 8.4 ins long and 4.7 lbs, Dewalt’s Premium 3-Speed Hammer drill (DCD996) features up to 2.8x faster application speed at 0-38, 250 BPM and 2,250 RPM, is up to 82% more powerful, and provides up to 2.8X more run time. The 20V MAX XR Hammer drill (DCD996) features a powerful brushless motor that supplies 820 Units Watts Out (UWO) for a faster application speed. Featuring durable nitro-carburized metal ratcheting chucks and comfortable handle grips, these tools are tough for durability on the jobsite and include coated and sealed switches that help to resist moisture and dust contamination.

DEWALT DCD996B Bare Tool 20V MAX XR Lithium Ion Brushless 3-Speed Hammer Drill (Tool Only) buynow big

List Price: $ 169.00

About The Author

http://www.powertooldiy.com

3 Comments

Anonymous
2019-02-26

14 of 15 people found the following review helpful

not too happy about. DeWalt needs to step it up, February 23, 2018

By

Stacy R.

Verified Purchase(What’s this?)

This review is from: DEWALT DCD996B Bare Tool 20V MAX XR Lithium Ion Brushless 3-Speed Hammer Drill (Tool Only) (Tools & Home Improvement)

I’m about to order my third one in a year I’m electrician in Florida and do a lot of concrete work… I use this tool on a daily basis when I called about a warranty they want me to drop it off over an hour and a half away at a service center to see if it’s covered… I don’t have time for that.. not too happy about . DeWalt needs to step it up..
Anonymous
2019-02-26

5 of 5 people found the following review helpful

Great for drilling concrete and all-around drill/driver. Nice work DeWalt!, January 16, 2018

By

Austin Guy

Verified Purchase(What’s this?)

This review is from: DEWALT DCD996B Bare Tool 20V MAX XR Lithium Ion Brushless 3-Speed Hammer Drill (Tool Only) (Tools & Home Improvement)

I bought this for the hammer mode for drilling concrete. I used to drill several 1/4″ holes 2 inches deep in 50 year old (hard) concrete. Each hole took less than a minute (it would take hours without the hammer mode). I’ve got the small 2 AH batteries, drilled 5 holes with power to spare. Love the LED in the base which lights up the drill point without shadows. The LED also has a ‘work light’ mode where it will stay on for 20 minutes to light up your work space. Also has screwdriver with adjustable clutch, non-hammer drill modes, variable speed, 3 gears for controlling torque vs. drill speed. 1 year maintenance warranty (meaning that if you wear it out they will repair it) , and 3 year manufacturer warranty (for defects). Nice work DeWalt. Tip on drilling concrete: push down just hard enough to keep the bit from bouncing and increase speed until you see concrete dust flowing out of the hole. If dust is not flying then maybe you are not drilling fast enough. If you get it right the bit will not overheat.
Anonymous
2019-02-26

47 of 50 people found the following review helpful

DCD996 Hammer Drill, July 31, 2016

By

EzRhino

Verified Purchase(What’s this?)

This review is from: DEWALT DCD996B Bare Tool 20V MAX XR Lithium Ion Brushless 3-Speed Hammer Drill (Tool Only) (Tools & Home Improvement)

**Update: Monster, Powerful and Right Now Torque. If you have ever gotten into serious drilling than you have to experience it with this drill. The instantaneous torque of the drill helps get work done faster. I have never had to back out of wood, concrete or steel. You must: I Mean must use good bits or this drill will snap them or turn them into a smooth reed. Also as you use it continually the drill does not heat up like other drills I have used in the past…. I’m looking at you Milwaukee.

I have used this drill and would still give it my rating to pros and handymen alike. The others post high numbers but this drill beats them all. Add the new dcb606 and 609 battery series and you will have all the power you will need in your hand. USA Built.

Bought this drill for weekly work as an installer. I also have a DCD791 for drilling and fastening. This drill is the most powerful non-corded drill I have ever used. It is similar to the Milwaukee M18 2nd gen but in my opinion the torque from this drill is more immediate and when you get into deep holes in masonry this powers through it faster. I am so impressed with this new hammer drill from Dewalt. As someone that relies on speed to get things done this drill has been amazing. I just finished hammer drilling approximately 75+ holes in concrete and cinderblock with a 5ah battery no problem. Still had 2 of 3 bars showing at the end of my day.
A warning: This drill has enough torque that if you are not completely focused on the task you are doing it will wrench itself out of your hand. Also in hammer mode this thing is extremely loud in closed bathrooms and electrical rooms where echoing occurs. I would recommend ear muffs for anyone doing drilling for more than a few holes.
Another thing to note is how little heat is generated when continually using the drill. I believe this will play well with the longevity of this power tool.
Last thing, the ergonomics of the drill in your hand is spot on. It is well balanced and very comfortable to work with all day. Vibrations are minimal for a drill with this much power. I believe this tool is A+ for professionals.

Proâs
Absolute Power House, Torque in all 3 Speeds, Hammer Drill Mode is excellent, Great Metal Chuck, LED light is best in class

Conâs
Forward and Reverse button needs refinement, 3 Speed Selector sometimes sticks