Dynamic Power 50 Piece Air Tool Kit. 1-1/2” Impact Wrench, 1-3/8” Ratchet Wrench, 5-Air Hammer w/Chisels, and mnay other great tools. D-W3-50K
- 1-1/2” Impact Wrench, 1-3/8” Ratchet Wrench, 5-Air Hammer w/Chisels. 10-Impact Sockets (1/2” to 3/4” and 11,12,13,14,17mm)
- 1-3/8” to 1/2” Adapter; 1-3/8” Dr. 3 “Ext, Bar, 5-1/4” Male Plugs; 1-Female Coupler, 1-Teflon Tape; 1-Air Gun; 1-Rubber Nozzle
- 1-Safety Nozzle; 2-Sport Needle & Adapter; 1-5/32” Allen Wrench; 1-Ball Foot Air Chuck; 1-High Pressure Nozzle; 1-Tapered Nozzle
- 2-1/4” to 1/4” Female & Male Hose Connector; 1-Air Tool Oil; 1-1/4” Female Plugs; 1 Blow Mold Case; 1-Swivel Hose Connector
- 1-Dual foot Tire Gauge; 1-Dr. Screwdriver Bit Holder; 6-1/4” Hex. Drive Bits; 1-Mini Oller
Dynamic Power 50 Piece Air Tool Kit includes a selection of popular air tools and related accessories for driving, grinding, sanding, chiseling and more, all in a handy storage case.
Air tools include: impact wrench, air ratchet, air hammer.
Accessories include hose fittings and couplers, hammer chisels, impact sockets and more.
A perfect starter set for home, shop or jobsite.
Dynamic Power products offer dependable quality to get the job done.
Each one meets or exceeds standards for durability and performance and offers a factory warranty to ensure your satisfaction.
List Price: $ 79.98
PORTER-CABLE PCE605K52 3-Amp Oscillating Multi-Tool Kit with 52 Accessories
- 3-amp motor delivers power to complete applications fast
- Tool-free system blade change allows quick changes and adjustments for specific applications without wrenches and bolts
- Depth and cutting guide helps complete plunge and cutting tasks faster and with more control
- 10-foot cord minimizes the need for extension cords
- Includes 52 accessories to provide all the essential components for your various projects
Porter-Cable PCE605K52 3.0 Amps Oscilating Tool Kit 52 Accessories
List Price: $ 79.00
Comparing to Rockwell Sonicrafter F30,
Both appeared to be excellent tools and you would have problem choosing the better one. The build quality is excellent in both tools, but there are differences in terms of features and performance. PC uses fast look which is far more convenient than on F30. You just push the lever, slide the blade in and you are done. It probably does not excerpt 1 ton of holding pressure like Sonicrafter but it does not need it as the lock mechanism is drastically different. F30 just presses the blade against the plate so the more pressure you get the less slippage you have. Porter and Cable on the other hand uses the slots in the blade to fix the position so the pressure does not have to be great. It is fast and convenient but … you can only use compatible blades, which should not be a problem as the latest PC takes the Dewalt universal fit blades. Sonicrafter is less convenient but in theory can take any blade. Basically anything that has an appropriate size hole. As the slots on the blade are not required you probably can even make your own accessory, like some fancy awl, stuck bolt loosener, engraver etc. Use your imagination.
Now about performance. F30 is rated 3.5A while PC only 3.0A so they should not be compared directly. Also in the commercial video by Sonicrafter they claim that F30 and F50 have 4 and 5 oscillating degrees respectively and cut through the wood much faster. That is true. But… (again). By having a larger oscillating degree you loose fine control. The tool turns from a precision tool to a brute force power tool.
Despite that F30 has more powerful motor I noticed that surprisingly it gets hot much slower than PC. On the other hand Sonicrafter’s handle vibrates so much that your jaw starts jumping up and down. This is despite the highly publicized Vibrafree Counterweight, which appeared to be a gimmick. PC vibrates much less. PC is packed in a better carrying box and has much more included accessories. It also has a depth restrictor that has many uses.
So the bottom line:
Porter and Cable is more convenient, more precise, has more features and vibrates less.
F30 is more powerful, overheats less and takes almost any blade. It also can cut deeper as the blade sits about 1 inch forward compared to PC.
You choose.
multi tool kit,
Update I just got the fein multimaster for my bday, I have to say if you can splurge on it go for it it is worth the extra cash in my opinion if you are using it a lot, however if you are only going to use once in a while the above listed will work fine or Fein lol… Anyway the Fein really works like a combo of the dremel’s smooth operating motor and the seemingly more orbital action of the porter cable best of both worlds feels like it will last a lifetime solidly built.
A well made tool,
The case fits nicely and has room for the full complement of blades and sanding pads. These days, I do not purchase a new tool without a good case. That is the best way to extend the life of a tool and reduce the time it takes to set up for an operation since all the required stuff is at hand in the case.
works,
First Impressions.,
Note. I did not use the included Air compressor fittings i have not had very good luck with these small hole fittings.
once you put the air line fittings on it will not fit back in the case, I removed everything an put it in a drawer in my toolbox.