Before undergoing any do it yourself project, make sure you invest all of your options and read up on the project. If the project is relatively easy, you may want to buy a set of power tools to complete it yourself.
Power tools allow humans to perform difficult task easier and accurately. If used correctly, you can professionally complete any project very efficiently and effectively. Many individuals choose to invest in a set of power tools to make small improvements on their house. You may want to remodel your home to make changes to increase the value of your house or fix something that was broken.
Most power tools can be found at large home center stores, hardware stores, and other retail outlets. The companies that supply power tools can provide you with instructions on how to use the tools. Also they have professionals who are usually around to provide you with more advice.
Make sure you understand how to use the tools before starting any project. However, if the job is complicated, it is advisable you hire a contractor who can complete the project professionally.
Drills are found in most department stores and are the most used power tools in the world. These tools are handy and can be used with a wide range of jobs. Because drills are used a lot, you should make sure to check the capacity limitations and accessories needed for the drills.
There are other power tools, such as saws. When using the tools, make sure the tool is secured and apply enough pressure to keep the drill cutting smoothly. Remember that forcing the drill can cause the motor to overheat, damage the bit, and reduce control.
Unplug the tool before changing bits, accessories or attachments. Remember to check what is behind something for possible electrical wiring or pipes in your path. If you see wires, then you should disconnect them and the power source. Avoid water pipes and always hold the tool by the insulated grasping surfaces.
Always keep owner and operation manuals close at hand and refer to them if you have questions. Make sure you turn the tool completely off when it is not in use. Check for loose power cord connections or any damage in the cord, which can cause electrocution.
Before using any power tool, wear safety goggles or safety glasses with shields which have been approved nationally. If there are many wood chips or dusty conditions, make sure you wear a dust mask. If you are working in a noisy environment, wear ear protection such as ear plugs. Those using power tools should refrain from wearing loose clothing or any dangling jewelry that can catch on the tool. Make sure your hair is tied back and does not interfere with the power tools.
Power tools can make a difficult task very easy and accurate. Make sure you use the tools correctly and that they are in good condition to avoid any injuries. If you do not understand the tools well, always consult a contractor to do your project.
If you are feeling the earge to start some DIY projects around the house, and dont have any tools, here is my top 5 power tools that I think you should have.
1.Drill
2.Orbital Sander
3. Jigsaw
4. Circular Saw
5. Chop(Miter) Saw
If you have a different Top 5, list it in the comment sections below.
https://www.facebook.com/WildmanProject
https://www.twitter.com/WildmanProject
Related Power Tools Articles
pretty much the same 5 tools I first aquired when I started woodworking, I agree those are the most useful to get you started.
I totally with your top 5!
Get more than one cordless drill? YES!
That is my #1 power tool also.
I bought a leather holster for it and it's great.When working on a ladder,gotta have it.
DIY power tools are a fine investment.
The more expensive ones have better bearings and a more powerful motor and use magnesium or plastic main bodies.
Also the brushes are easier to replace on a quality power tool.
Get 'em on Ebay.
I have made a sway bed. It hangs by four ropes attached to four legs of a giant pyramid. Now I need the motor. I thought of a satellite actuator arm, but a multi-speed drill should work better using a threaded rod. I plan on building a housing for it and clamping it to one leg of the pyramid. Any suggestions what kind of a drill would work best? It needs to be slow, quiet at low speeds and able to rotate in both directions slowly. Or just any suggestions would be appreciated. Thanks.
You cannot stop at 5, too many cool tools around.
What's the best drill for a electric bike ?
Good thing noone uses craigs list in Germany and Ebay is fukin expensive <3
when your mom says get me some DIY say to them do it yourself because thats is what it stands for.
so…how often would you say you use your chop saw then? 😉
thanks, the tips will help me get started..
Esta chido los tools
If I want to be super frugal and safe as beginner in DIY stuffs , can I manage with only a corded drill and jigsaw . I intend to work on weekend projects in quarterly once kind of mode ?
What model is your jigsaw?
Also I have a ryobi power sander but the shape looks like an iron. What is the benefit of either circular or the shape that I have?
No impact driver? I use my impact driver more than any of my other tools and that's saying a lot since I have over two dozen power tools! and I would also rank drill as one of the 5 but now a days you can get drill bits that fit in impacts so u can drill with them the only place the impact can't compete is if you have a hammer drill that will drill concrete an impact can't do that.
Hey, where did you get the mini brut barrel for pencils in the background?